PA450
PA450 is a digital display four-eye 4-color LED PAR light with RGBW color mixing, 6/9/13/17/21CH DMX channel modes, master dimming, strobe, built-in programs, Auto mode, Sound active mode, signal hold, console priority and temperature display.
| LED configuration | Four-eye 4-color LED PAR light, exact LED quantity / wattage to be confirmed |
|---|---|
| Color system | RGBW; 8 built-in color outputs; Built-in programs; Color mixing |
| Control | DMX512; Auto mode; Sound active; Master-slave; Built-in programs |
| DMX channels | 6/9/13/17/21CH |
| Dimming | Master dimming; Red dimming; Green dimming; Blue dimming; White dimming; Linear dimming from dark to bright |
| Strobe | Master strobe; Strobe speed from slow to fast |
| Display | Four-digit digital display; MENU / UP / DOWN / ENTER buttons; Display reverse setting; Screen off setting; LED working temperature display |
| Working temperature | LED working temperature display available; operating temperature range to be confirmed |
Specifications are based on the current PA450 product record and may change without prior notice. CRI, Luminous flux, Packing size, Gross weight, Certification, Warranty, MOQ, Lead time require final sales confirmation.
Product questions
What type of fixture is PA450?
PA450 is a LED PAR Light / Front Light PAR. PA450 is a digital display four-eye 4-color LED PAR light with RGBW color mixing, 6/9/13/17/21CH DMX channel modes, master dimming, strobe, built-in programs, Auto mode, Sound active mode, signal hold, console priority and temperature display.
What light source does PA450 use?
The published light-source specification for PA450 is Datasheet pending.
What is the IP rating of PA450?
The published protection rating for PA450 is TBC. Confirm installation conditions and the latest production specification with iTOPLITE before use.
What beam or zoom range does PA450 provide?
The published optical range for PA450 is TBC.
Which DMX channel modes does PA450 support?
The current product record lists 6/9/13/17/21CH. Contact iTOPLITE for the latest DMX chart and firmware-specific documentation.
Where is PA450 typically used?
Recommended applications include Stage front lighting, Clubs and bars, Small stages and live shows, Event and rental projects. Final fixture selection should account for throw distance, required output, control plan and environmental conditions.
Planning with PA450
Overview
PA450 is a led par light / front light par in the LED PAR range. Its published light-source specification is Datasheet pending, the optical record lists TBC, and the enclosure rating is TBC. The available control record lists 6/9/13/17/21CH. These values describe the current product record and should be checked against the production version offered for a project. Selection should begin with the required visual task and site conditions rather than one headline value.
Where it is used
The published applications include Stage front lighting, Clubs and bars, Small stages and live shows, Event and rental projects. In a real design, each application changes the priorities. Touring teams may focus on handling, repeatable setup and control-library consistency. Fixed installations may give more weight to access, operating cycles and planned maintenance. Outdoor work also requires compatible connections, distribution and procedures; the fixture rating does not protect unrelated parts of the system.
Reading the specifications
The TBC optical specification should be evaluated at the actual throw distance and target size. Request photometric data or test a production-representative sample when beam coverage or camera exposure is critical. The published TBC rating describes enclosure protection under defined conditions, not permission to ignore mounting orientation, seals, connectors or severe-weather decisions. The 6/9/13/17/21CH control entry identifies the available channel footprint; obtain the current DMX chart and match it to the intended firmware and console profile.
The light-source entry, Datasheet pending, is not by itself a circuit-load calculation. Use the complete input-power and supply data in the specification table when planning distribution. Include clamps, safety devices, cables, cases and accessories when reviewing rigging and logistics. If a required value remains marked as pending, keep it as an approval item and obtain written confirmation before ordering.
Project and purchasing review
Prepare a short requirement sheet covering application, environment, mounting, throw, control, supply, required documents, accessories, quantity, spares and delivery scope. Compare alternatives at the same operating conditions. A feature is valuable only when it supports a real cue, reduces project risk or improves operation. Do not infer price, certification, warranty or performance that is not present in the approved record.
Before accepting production, confirm model identity, external condition, included accessories and control behavior. Run movement and optical functions through the modes the project will use, record the result and update the as-built patch. Keep the final data sheet, DMX chart and service contacts with the asset record so operators and technicians can trace the basis of the selection.
